China JNC high-efficiency waste oil regeneration to diesel fuel filter
1.overviewThis machine can be used in black engine oil,Crude oil,plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with Waste oil , through the coal (or fuel oil, gas) heating to working temperature, the maximum working temperature about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.2.system of equipment1)Reaction tank: waste oil will be pumped into this tank from the primary filter .
2)lHeating system: by burning coal or fuel oil to make the oil temperature up to setting value.
3)This system equips with insulation system.
4)lCatalytic system: waste oil reaches the predetermined temperature, via catalytic effect, and then the gaseous hydrocarbons will become gasoline and diesel composition.
5)lCooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials.
6)lTemperature control system: ensure that waste oil transform into gasoline and diesel oil, waste oil drying by distillation, can stop heating timely.
7)lExhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards.3.Index of oil after treatment:1)Yield: Diesel oil: 86-88%, Gasoline oil: 5-6%
2)Low-speed diesel engine can be used directly
3)After processing the oil indicator
|Color Index|| ||≤2|
|Density at 15 ºC||kg/m³||825|
|Kinematic Viscosity at 40 ºC||mm²/s||2.559|
50% recovered at
95% recovered at
|Cetane Index|| ||52.6|4.oil sample photos5. performance characteristics,advantage introduction1) Working principle: waste oil under the action of catalyst distillation to get high quality diesel2) Do not need acid, alkali, clay to refine the final diesel, just use our plate frame filter machine to remove the impurities.3) Direct heating with fuel or gas, convenience, economy, health, safety, environmental protection4) The total cost of processing one ton used oil only USD22(including fuel, electricity and catalyst cost)5) High oil yield: diesel 86~88%,gasoline 5~6%,oil residue 6~8%6) This machine uses a special way heating, high thermal efficiency, and difficult to form carbon fouling, greatly reducing consumable and maintenance costs.7) Currently in the market, the distillation is based on the coil heating; the temperature can't meet the technical requirements, oil yield only 65%.8) This kind of heating mode can make it easy to scale.what's more, it needs high temperature pump, which is expensive, easily breakable, need frequent replacement, high cost in the later period9) This machine is safe, reliable, durable, easy operation, low labor intensity, 1 to 2 workers can easily operate the machine.10) about hydrogenation process: the treatment cost more than 1000 RMB for per ton waste oil, oil yield only 80%,hydrogen production catalyst risk is big, easy to explode, and large investment, need about 20 years to recover the cost.6.if this product can't meet your need,we also have other series7.company profileChongqing Junneng Machine Manufacturing Co., ltd. is a professional manufacturer engaged in the research, development, production, sale and service of waste oil recycling machine.we have Passed ISO & CE certification.8 Years Gold Supplier in Alibaba.